automotive carbon deposition special B3 type dry ice cleaning machine is a new product with small bolume, felxible use, the use of the first dry ice pressure mixed feeding system, the industry has an independent fast switch to match different nozzle, can achieve the rapid cleaning of gasoline and diesel gererator carbon,equiped with large flow adjustment equipment,can be pressed on time, fo automotive piston carbon,inlet carbon,machine heating,bottom plate,interior decoration, electrical pipe and other components for allround cleaning but not damage parts, to achieve a machine multi-purpose cleaning and maintenance purpose.
Dry ice blast cleaning (dry ice blast cleaning), also known as cold spray technology, uses compressed air as a power and carrier, and uses dry ice particles as accelerated particles. The dry ice particles are sprayed out at a rate close to the speed of sound through a dedicated dry ice blast cleaning machine. , And carry a large amount of kinetic energy. When it collides with the surface of the dirt, the above-mentioned kinetic energy is transferred to the dirt. The dry ice instantly expands about 800 times the volume of the body, forming a physical cleaning method that embrittles the dirt and peels off the surface of the object. Because dry ice blasting volatilizes and sublimates instantaneously, it will not cause any damage to the surface of the object.
Cleaning the car engine compartment and surface oil stains with dry ice can obtain a good surface cleaning effect, and there is no damage to the engine pipeline, and there is no impact on the mechanical performance; the aluminum or cast engine block has undergone about 1000 hours of salt spray test and cleaning The previous data has not changed; and after continuous high-intensity dry ice blast cleaning of the engine shell, combustion chamber, and intake valve when the engine temperature is about 160°C, the engine is immediately installed to start and run the test, and the mechanical indicators have no adverse effects , And the measured engine torque is significantly higher than before cleaning, even restored to the factory level, and fuel consumption is significantly reduced.
Dry ice blasting is a revolutionary blasting method that uses small, compact dry ice pellets as the blasting material. The dry ice pellets are accelerated in a jet of compressed air similar to that used in traditional blasting methods.
Dry Ice Blasting will often allow a company's production equipment to be cleaned while in operation without the need for dismantling and costly downtime.
Dry Ice Blasting is non-abrasive, and surfaces are therefore treated gently. The system can thus be used on easily-damaged surfaces like nickel, chromium and soft aluminum.
The process is dry, and no waste materials are produced. This means that cleaning can be carried out even during short production shutdowns.
Carbon deposition is medium before cleaning of combustion chamber, and the piston surface is almost completely covered with carbon deposition; After cleaning, the piston face can be seen obvious light, surface inorganic carbon, can be seen obvious metal light, recovery power.