The ICOMA3 are the interfaces for the repair of BMW and MINI vehicles recommended by BMW. The ICOM is specifically designed for BMW and MINI vehicles. The ICOM incorporates powerful
processors and a high storage capacity. Latest Generation Diagnostic Head For Cars BMW, MINI, Rolls-Royce BMW-Model ICOM (A) Can Replace BMW ICOM A2。
ICOM A3 for OBD communication
ICOM B, in combination with the ICOM A3, for MOST communication
ICOM C, in combination with the ICOM A3, for 20 PIN diagnostic connector.
- Functionally compatible to ICOM A2
- Mechanical design similar ICOM A2
- Backwards compatible to car adapters (ICOM B, C) and motorcycle adapters (ICOM D, E)
With free BMW Engineer Software (INPA, NCS, WinKFP, E-Sys 3.27.1, e-sysplus 3.27.1, tool32 61.5, BMW FSC code generator.
ISPI NEXT—BMW ISPI NEXT is latest generation after service tool for BMW, these brief instructions describe the basic functions of the AIR application (Aftersales Information Research) in Service. For the Diagnostic, it use IPSI (Rheingold) and ISPI Next for Coding Programming functions.
ISTA/D— Integrated Service Technical Application Diagnostic. ISTA/D is used to diagnose BMW all series and models from all systems.
ISTA/P— Integrated Service Technical Application/Programming. ISTA/P is used to process all coded, programmed and enable-dependent control modules in BMW Group vehicles.
Rheingold—Diagnostic and repair guide, including Diagrams and disassembly Figure
KSD—BMW KSD (Kaufmännische Service Daten, i.e. Commercial Service Data) is a collection of invaluable data for determining labor hours, inspection sheets and general service methods. There’s also information about wheels and rims for the various models.
EasyConnect— Used to Configure the Environment Parameter of Engineer Software for E series, can activate or release ICOM Port
IToolRadar— Used to recognize ICOM, activate or release ICOM Port
ETK— Accessories Catalog
EDIABAS Tool32— Engineer Software for E series, able to run directly
INPA— Engineer Software for E series, for diagnosis
NCS Expert Tool—- Engineer Software for E series, for coding
WinKFP—Engineer Software for E series, for programming
E-sys — Engineer Software for F series (available for programming and coding)
BMW Standard tool
Service & Support:
Warranty: 18 month
Update: 18 months for free
Canot use? Dont warry
1.Network distance teaching:
3.Door Training(South-east Country)
4.Remote Technical Support(Programing and Coding)
Welcome to our company to join in technology training and else
Place of OriginChina
Sofeware Version4.21/3.66 /Lestest Update
Package size36*27.5*8cm; 46*19*42cm(kit)
Gross weight1.65kg; 7.33kg(with laptop)